Commercial cleaning services in Calgary

Pressure Washing

A pressure washer is one of the simplest, most affordable tools available for outside cleaning. But when used incorrectly it can cause damage and other problems. Our trained technicians can use the correct pressures and techniques to clean and protect a variety of surfaces.

Why Do You Need Pressure Washing Services?

Pressure washing services are beneficial for several reasons:
  • Pressure washing can efficiently remove dirt, grime, mold, mildew, and other debris from various surfaces such as driveways, sidewalks, decks, fences, siding, and outdoor furniture. It's particularly effective for tough stains that may not come off with regular cleaning methods.
  • Pressure washing can save you time compared to manual scrubbing or using less powerful cleaning equipment. It covers large surface areas quickly and effectively, making it ideal for cleaning tasks that would otherwise be labor-intensive and time-consuming.
  • Regular pressure washing can help prevent the buildup of dirt, mold, mildew, and other contaminants that can degrade the appearance and structural integrity of surfaces over time. By keeping surfaces clean, you can prolong their lifespan and reduce the need for costly repairs or replacements.
  • Pressure washing can dramatically improve the appearance of your property by restoring surfaces to their original condition. This can be particularly important if you're trying to sell your home or improve its overall aesthetics.
  • Removing mold, mildew, algae, and other contaminants from surfaces can help create a healthier environment by reducing allergens and preventing slippery surfaces that could pose a safety hazard.
  • Pressure washing typically uses less water than traditional cleaning methods, making it a more environmentally friendly option.
Pressure washing services offer a convenient and effective way to clean and maintain various surfaces, improving both the appearance and longevity of your property.

Areas of Application

Some common applications include:
  1. Vinyl siding – to remove dirt, grime, and mold. If not removed, these unsightly contaminants can cause extensive damage.
  2. Gutters – to keep gutters and downspouts free from blockages and help avoid drainage problems. We take all the waste matter away with us.
  3. Roofs – to kill and remove roof dirt. We use contractor-grade cleaners and low pressure to make your roof look new again.
  4. Concrete – to remove dirt and grime, as well as irrigation rust stains, from driveways, sidewalks, and patios.
  5. Brick and block – to remove dirt, mold, and mildew. Because some types of brick can withstand less pressure than others, we can adjust the pressure to suit the particular materials.
  6. Decks and wood – to restore wood’s natural beauty, we use specialty cleaners and then wash the wood with the optimum amount of pressure. After a neutralizing process, the wood is dried to the proper moisture level, and a contractor-grade sealer is applied.
  7. Driveways and walkways – for cleaning driveways, sidewalks, pathways, and parking areas. It can remove oil stains, tire marks, dirt, and debris, improving the overall curb appeal and safety of the property.
  8. Fences and gates – to revitalize fences, gates, and other exterior structures, removing dirt, grime, mold, and mildew.
  9. Vehicles and equipment – to clean vehicles, including cars, trucks, vans, and boats.
  10. Outdoor play equipment – to clean playgrounds, swing sets, trampolines, and other outdoor play equipment. It can remove dirt, mold, mildew, and other contaminants, providing a safer and more enjoyable play environment.

These are just a few examples of the many applications of pressure washing in Calgary. It is a versatile and effective cleaning method for a wide range of surfaces and objects, both residential and commercial.

How is Commercial Pressure Washing Carried Out?

Commercial pressure washing in Calgary involves several steps to ensure thorough cleaning and safety. Here’s an overview of the typical process:

  1. Assessment and planning The first step is to assess the area to be cleaned and identify any specific requirements or challenges. This includes determining the type of surface, assessing the level of dirt or stains, and identifying any delicate areas that require special attention.
  2. Preparation. Before pressure washing begins, the area must be prepared. This may involve clearing debris, moving obstacles, covering delicate plants or objects, and securing any loose items that could be affected by the force of the water.
  3. Safety precautions. Safety is paramount during commercial pressure washing. Protective gear such as goggles, gloves, and waterproof clothing may be worn by the technicians operating the equipment. Warning signs or barriers may also be set up to alert others to the cleaning process and ensure their safety.
  4. Application of cleaning solutions. Depending on the nature of the dirt or stains, specialized cleaning solutions may be applied to the surface before pressure washing. These solutions help to loosen dirt, kill mold or mildew, and break down grease or oil stains, enhancing the effectiveness of the pressure-washing process.
  5. Pressure washing. Using a commercial-grade pressure washer, the technicians will systematically clean the surface, starting from the top and working their way down. They will adjust the pressure settings and nozzle attachments as needed to achieve the desired level of cleaning without causing damage to the surface.
  6. Rinsing. After the surface has been thoroughly cleaned, it is rinsed with clean water to remove any remaining dirt, debris, or cleaning solution residue. This ensures a streak-free finish and prevents any potential damage or discoloration caused by leaving cleaning agents on the surface.
  7. Drying and inspection. Once the pressure washing is complete, the surface is left to air dry naturally. Technicians may use blowers or other drying equipment to speed up the process, especially for large or heavily trafficked areas. After drying, a final inspection is conducted to ensure that the cleaning meets the desired standards.
  8. Cleanup and post-work. Any equipment, tools, or protective gear used during the pressure washing process are cleaned and properly stored. Debris and wastewater generated during cleaning are collected and disposed of under local regulations, ensuring environmental compliance.

Commercial pressure washing specialists effectively clean a wide range of surfaces while ensuring safety, quality, and environmental responsibility.

Which Pressure Washing Contractor to Choose in Calgary?

There are many pressure washing companies in Calgary, but Regency Cleaning Services has many advantages and features:
  • Regency Cleaning Services employs highly skilled technicians who are trained in the latest pressure washing techniques and safety protocols. With years of experience in the industry, they have the expertise to handle a wide range of commercial pressure-washing projects efficiently and effectively.
  • Regular pressure washing not only enhances the aesthetics of commercial buildings and surfaces but also helps prolong their lifespan. By removing corrosive substances, pollutants, and organic growth, Regency Cleaning Services helps prevent premature deterioration and costly repairs, saving businesses money in the long run.
  • Regency Cleaning Services utilizes advanced, commercial-grade pressure washing equipment and environmentally friendly cleaning solutions to deliver superior results. High-powered machines can tackle even the toughest stains, dirt, and grime, leaving surfaces looking clean and rejuvenated.
  • Whether it's cleaning building exteriors, sidewalks, parking lots, or industrial equipment, Regency Cleaning Services offers customized solutions tailored to meet the specific needs of each client.
  • A clean and well-maintained exterior is crucial for creating a positive impression on customers, visitors, and employees. By removing dirt, stains, mold, and mildew, Regency Cleaning Services helps enhance the curb appeal of commercial properties, improving their overall appearance and attractiveness.
  • Clean, well-maintained surfaces contribute to a safer and healthier environment for employees, customers, and visitors. By removing slippery substances, allergens, and contaminants, Regency Cleaning Services helps businesses comply with health and safety regulations, reducing the risk of accidents and liability issues.
By ordering commercial pressure washing services in Calgary from Regency Cleaning Services, businesses get a convenient and cost-effective solution to keep their premises clean, attractive, and safe. With our experience, state-of-the-art equipment, and commitment to customer satisfaction, our company is a trusted partner for all pressure washing needs.
Have questions about pressure washing services? Consult with our company manager at (403) 520-7788.
Contact us today for a FREE estimate

Want more information?

Request a Quote For Our Services

CONTACT US OR REQUEST A QUOTE TO DISCUSS YOUR SPECIFIC NEEDS.

GET A QUOTE

PHONE

Email

info@regencycleaning.ca

Say "Hello"

Facebook-f Linkedin-in Twitter
Commercial cleaning services in Calgary

Website & Marketing By CAYK

&copy 2024 Regency Cleaning Services